False ceiling installations, gypsum board and metal stud partition walls, cove lighting troughs, and skimming finishes.
Architectural false ceilings and smart partition walls define the spatial elegance, acoustics, and lighting functionality of any room. Tabeeb Contractor fabricates and installs gypsum board false ceilings, LED cove light pelmets, acoustic office grid ceilings, and sound-insulated drywall partitions.
We are a direct builder with experienced, in-house craftsmen—delivering cost savings, rapid timelines, and strict compliance with Singapore statutory regulations.
We use heavy-gauge galvanized steel channels that resist warping and sagging over time.
High-density acoustic rockwool provides superior privacy between executive offices and bedrooms.
3-coat fiber-taped joint compound creates flawlessly smooth surfaces ready for painting.
Clean dry-construction methods ensure rapid completion with minimal dust disruption.
Every project follows a transparent, monitored timeline from initial blueprint consultation to final handover.
Laser alignment of ceiling levels, partition axes, and electrical lighting conduits.
Secure anchor bolting of heavy-gauge ceiling suspension rods and partition studs.
Install rockwool acoustic insulation followed by gypsum board fastening.
Perforated paper joint taping, three coats of joint compound, and dustless orbital sanding.
Standard HDB ceiling heights are typically around 2.6m. A false ceiling usually drops 100mm to 150mm to accommodate recessed downlights or LED cove strips while maintaining ample head clearance.
Yes! By incorporating 50mm to 75mm high-density rockwool acoustic insulation inside the drywall stud cavity, sound transmission is reduced significantly.
Share this direct contractor link with them on WhatsApp or Facebook.
